Short answer: choose one dominant main color, add one or two accents for contrast, and keep the brightest colors for small areas. Dark main colors with a light or fluorescent accent are easy to pick out on track, and high contrast between the colors also keeps names, numbers and logos readable.
The MotoSpeeds suit designer gives you 22 colors and lets you color each part of the suit separately. That is a lot of freedom, so it helps to have a few rules before you start tapping panels. This guide covers how the color step works, how to build a scheme that looks good, and how to avoid the common mistakes.
The designer offers 22 colors in four groups:
The team colors are shades named after well-known racing colors. They are simply swatches in the palette; they do not mean any team or manufacturer has approved your suit.
You color the suit by part: the main color, the accent colors, the Moto Speeds logo and the sliders. Tap a part of the suit to choose it, then tap a swatch. The sliders setting changes only the light slider surfaces,. Nothing is preselected, so you start from the drawing's original shades and make every choice yourself. Panels you never touch keep that original shade, and your order lists them as "Original".
The main color covers the largest area, so it sets the whole mood of the suit. Three practical questions help narrow it down.
If you want a quick starting point, the designer has 5 ready-made looks: Black and red, White and red, Fluorescent yellow, Blue and white, and Black and orange. Each one also sets the slider, Moto Speeds logo, name and number colors, so you can apply one and then adjust parts you want to change.
Two colors can be very different in hue and still look similar from a distance if they are the same lightness. Red and green are the classic example. A reliable approach is to pair a dark color with a light one.
| Combination | How it reads |
|---|---|
| Black with white | Highest contrast; clean and easy to read at a distance |
| Black with Fluorescent Yellow | Very strong; the accent jumps out against the dark base |
| White with Blue or Red | Classic and crisp; the main color stays light |
| Gray with Gunmetal | Subtle; good if you want a quiet suit, but low contrast |
| Blue with Red (both mid-dark) | Can blur together from far away; add white or a light accent |
A simple test: look at your preview, then squint or step back from the screen. If two panels merge into one shape, increase the difference in lightness between them.
Fluorescent Red, Fluorescent Yellow and Fluorescent Green are the most eye-catching colors in the palette. They are easy to spot in a pit lane or on a crowded track day, which is why many riders like them. The trade-off is that a very large fluorescent area is tiring to look at and tends to overpower logos and numbers.
A good use is as an accent on a dark suit: shoulders, the outer arm panels, a lower leg stripe, or the hump. A fully fluorescent suit is a valid choice (one of the ready-made looks is exactly that), but if you are unsure, start with an accent and see how the whole suit balances.
Silver Chrome, Golden Chrome, Gunmetal and Metallic Blue add a sheen that flat colors do not. They look best used sparingly, for a stripe, a panel or the sliders area, rather than as every accent on the suit. Two metallics competing with each other usually looks busy. A single metallic against black or white tends to look the most deliberate.
Your color choices decide how readable everything you add later will be. The designer helps here: names, numbers and logos switch to black or white automatically where the color you chose would not read on the panel under it. That is a safety net, not a design plan. If your number sits on a mid-tone panel, the switch may leave you with a result you did not expect.
Our guide to adding sponsor logos, your name and number covers the zones and limits in detail, and it is worth reading before you finalize the colors.
If you want your suit to echo a particular bike, the replica designs are a different route. Those designs come with the drawing already set up, and the protection and sliders are drawn in. That means the protection choices and slider color do not change the replica picture. See the guide to replica race suits in your bike colors for the full list. We do not describe replica designs as official or licensed.
Every screen shows color a little differently, and leather has its own texture and sheen. Treat the designer preview as a guide to the layout and contrast, not as an exact color match. This is one reason the sketch step matters: we send you a final sketch of your design to approve before production, so you can look at the whole suit again before anything is cut.
The designer lets you save and share your design on every step, so you can show a friend or your team and get a second opinion before you commit. For a full walk-through of every step, start with the guide to how the MotoSpeeds suit designer works, or open the Suit Designer Guide.
The designer has 22 colors: 11 standard, 3 fluorescent, 4 metallic and 4 team colors. You can color the main body, the accents, the Moto Speeds logo and the sliders separately.
Bright and fluorescent colors are the easiest to spot, and strong contrast between light and dark parts helps too. Whatever you choose, color alone is not a safety feature; protection and fit matter far more.
Yes. The designer has 5 ready-made looks. Apply one, then tap any part of the suit to recolor it.
No. Repsol Blue, Yamaha Blue, Kawasaki Green and HD Orange are palette colors only. They do not imply any endorsement or license.
Yes. We send a final sketch of your design to approve before production, and photos of the finished suit before it ships.
Ready to try combinations? Open the MotoSpeeds suit designer, pick a model and start with your main color.