Kangaroo leather vs cowhide is the big leather choice when you pick a motorcycle race suit. Both hides can make a strong suit. The real gaps are in weight, feel and cost. Below you will see how the two compare, what the armor does, and how to pick the right hide for the way you ride.
TL;DR:
Kangaroo leather is very strong for how thin it is. Its fibers are packed tight and run mostly in line with the surface. So a suit maker can use thinner kangaroo panels and still get a tough hide. Cowhide gets its strength from thickness. It needs more material to feel just as tough.
That is why people say kangaroo has a high strength-to-weight ratio. It means you get a lot of strength for each gram of leather. Cowhide is strong too. It is just heavier for the same job.
Strength alone does not decide how a suit performs in a crash. How the seams are sewn, where each panel sits and what armor the suit carries matter just as much. A well-built cowhide suit and a well-built kangaroo suit can both do the job on track.
Race suits also use different leather in different places. Some zones get thicker leather or a second layer. To learn more, read why race suits use different leather thicknesses.
A kangaroo leather motorcycle suit is usually lighter and softer than a cowhide suit. Thinner panels mean less bulk. That makes it easier to tuck in behind the screen and shift your weight across the bike. Cowhide feels stiffer when it is new. It softens with wear, but it stays a little heavier.
The shows how a kangaroo suit is built to move with you. It uses Monaco treated kangaroo leather. It also has two kinds of flex panels:
Cowhide suits use flex panels too. The Savitar Pro has Keprotec stretch inserts. The Tyro has Kevlar stretch inserts and aramid accordion leather panels. These panels help a thicker hide bend with your body.
A new cowhide suit needs a short break-in. Wear it on a few easy rides before your first track day. The leather will soften at the knees, hips and shoulders, and the suit will start to feel like yours.
Leather and armor do two different jobs. The leather resists abrasion. That means it stops the road from wearing through to your skin when you slide. The armor handles impact. It spreads and softens the force when you hit the ground. Choosing kangaroo or cowhide changes the leather, not the armor.
Limb armor is rated under a European standard called EN 1621-1. It has two levels:
Back protectors have their own standard, called EN 1621-2. It uses the same idea of Level 1 and Level 2.
All four MotoSpeeds race suits carry the same core armor set. Each has CE certified to EN 1621.1 composite protectors, CE Type A interchangeable knee sliders and a CE Level 2 back and thigh protector. Knee sliders are the hard pucks on the outside of the knee. They take the scrape when you lean the bike over.
These CE marks apply to the armor only. They do not rate the leather or the whole suit. Another standard, EN 17092, gives a whole garment a class from AAA down to C. It looks at the suit as one piece, including how well it resists sliding. If that class matters to you, ask for it before you order.
MotoSpeeds makes one kangaroo race suit and three cowhide race suits. The Whiz Tech uses kangaroo. The Savitar Pro, Veteran and Tyro use cowhide. All four share the same CE armor set. They differ in the leather finish, the hard armor on the outside and the lining.
Full-grain means the whole top layer of the hide is kept. Drum-dyed means the leather is dyed while it turns in a large drum, so the color soaks deep into the hide. See the for the full build.
Top-grain leather is the top layer of the hide with the surface lightly sanded and evened out.
Each of the four comes as a 1-piece suit, a 2-piece suit, a jacket or a pant. Each also has a Custom Size option, so the suit can be made to your measurements. Read How to Measure before you order. You can compare all the side by side.
Pick kangaroo if you race or ride many track days and want the lightest, most supple suit. Pick cowhide if you mix road and track, want a tougher feel, or want to spend less. Neither hide is the safer one by default. The way you ride and what matters most to you should decide.
Use this simple rule:
Heat is a separate question. How cool a suit feels depends more on perforation and vents than on the hide. The Whiz Tech has a perforated outer shell. The Savitar Pro has localized micro-perforation. If you ride in hot weather, check for these features first.
Kangaroo suits usually cost more than cowhide suits. Care is much the same for both hides. Wipe the suit down after each ride. Let it air dry away from heat. Use a leather conditioner now and then. Hang it on a wide hanger so the shoulders keep their shape.
A few more care tips help both hides last:
For a step-by-step guide, see how to clean a race suit.
Kangaroo wins on weight and suppleness. Cowhide wins on cost and a tougher feel. Both can carry the same armor, and both need a good fit. Use the table below to weigh the trade-offs side by side before you choose your next race suit.
| Factor | Kangaroo | Cowhide |
|---|---|---|
| Weight | Lighter, thinner panels | Heavier, thicker panels |
| Suppleness | Bends easily with you | Firmer, relies more on stretch panels |
| Feel when new | Soft from the first ride | Stiff at first, softens with wear |
| Cost | Usually higher | Usually lower |
| Typical use | Racing and frequent track days | Track days and a road and track mix |
Comparing cowhide with goatskin or sheepskin for gloves and jackets? See cowhide vs goatskin vs sheepskin for riding gear.
Kangaroo leather is strong for its thickness. That lets a suit use thinner, lighter panels and still feel tough. Cowhide reaches its strength by being thicker. In a crash, both hides rely on good seams, a good fit and the right armor. The hide is only one part of the suit.
Kangaroo is better if you care most about low weight and a soft, close feel on the bike. Cowhide is the choice when cost matters or you like a thicker, tougher feel. Neither hide is better for every rider. Think about where you ride and how often.
Yes. The Whiz Tech is the MotoSpeeds kangaroo suit. It uses Monaco treated kangaroo leather with TPU-reinforced titanium armor on the shoulder, elbow and knee. It has Schoeller Keprotec stretch inserts, aramid accordion leather panels, a perforated outer shell and a detachable breathable mesh lining.
Check the armor first: its type and its EN 1621-1 level. Then look at the stretch panels at the back, knees and shoulders. Check that the liner can come out for washing. Last, sit on your bike in a full tuck. The suit should not pull at the back or pinch at the knees.
Yes. The let you choose kangaroo, cowhide, sheep or goat leather. You can also see the full range of .