At highway speeds, the road doesn’t forgive mistakes.
A fall at 60 mph can expose your gear to extreme friction, heat, and impact. That’s where CE Ratings AAA, AA, and A come into play. These ratings are not just labels—they define how well your gear can protect you when it matters most.
Many riders assume all protective gear offers the same level of safety. In reality, abrasion resistance varies significantly depending on certification levels and risk zones.
This guide breaks down EN 17092 standards, explains how CE ratings work, and helps you choose the right level of protection for your riding style.
Explore here:
CE ratings are part of the European safety certification system for motorcycle gear.
They indicate how well a garment performs in:
Abrasion resistance
Tear strength
Seam strength
Impact protection
Designed for high-speed riding
Maximum abrasion resistance
Used in racing and aggressive riding
Balanced safety and comfort
Suitable for touring and daily riding
Lightweight gear
Minimal abrasion resistance
Best for urban commuting
AAA → Highest
AA → Moderate
A → Basic
AAA → High-speed riding
AA → Medium-speed riding
A → Low-speed commuting
AAA → Premium leather / advanced textiles
AA → Mixed materials
A → Lightweight fabrics
AAA gear is designed for maximum crash protection, while A-rated gear prioritizes comfort.
EN 17092 is the official European standard that tests motorcycle clothing.
It evaluates gear under controlled conditions to simulate real crash scenarios.
Abrasion resistance
Impact protection zones
Tear strength
Seam durability
Without EN 17092, there would be no consistent way to compare gear safety.
This standard ensures that CE-certified gear meets minimum protection requirements.
Abrasion resistance is the ability of gear to withstand friction against the road surface.
During a crash:
Skin contact with asphalt causes severe injuries
Friction generates extreme heat
Materials can wear through quickly
At 60 mph, a rider can slide for several meters. Without proper abrasion resistance, standard clothing fails within seconds.
Motorcycle gear is divided into risk zones based on impact likelihood.
Includes:
Shoulders
Elbows
Knees
These areas face the highest abrasion and impact.
Includes:
Upper arms
Thighs
Moderate protection required.
Includes:
Chest
Back
Lower abrasion exposure but still important.
Higher CE ratings require stronger materials in critical zones, especially Zone 1.
At high speeds, gear must:
Resist tearing
Prevent burn-through
Maintain structural integrity
AAA-rated gear:
Withstands longer slide times
Uses reinforced panels
Protects critical impact zones
This is why professional riders rely on high-performance motorcycle suits.
Full-grain leather
Reinforced textiles
Kevlar blends
Double/triple stitching
Reinforced seams
Layered abrasion panels
Even the best materials fail without proper construction. Stitching quality is just as important as fabric strength.
Low-speed impact
Minimal sliding
Basic protection sufficient
Moderate sliding
Requires better abrasion resistance
High-speed slide
Extreme friction
Maximum protection required
City riding → A
Touring → AA
Racing → AAA
Higher speed = higher rating needed.
Lightweight → A
Balanced → AA
Maximum safety → AAA
Better gear costs more but protects better.
Avoid these:
Choosing style over safety
Ignoring CE ratings
Buying low-rated gear for high-speed riding
Overlooking fit and construction quality
CE Ratings AAA, AA, and A are not just technical labels—they are your safety benchmark on the road.
Understanding EN 17092, abrasion resistance, and risk zones helps you make smarter decisions.
If you ride fast or aggressively, AAA-rated gear is not optional—it’s essential.
Shop AAA →
AAA is the highest protection level under EN 17092, offering maximum abrasion resistance and safety for high-speed riding.
Yes, AA-rated gear is suitable for most highway conditions, offering a balance between protection and comfort.
AAA provides significantly higher abrasion resistance and protection, while A is designed for low-speed urban riding.
In many regions, CE certification is required to ensure minimum safety standards in motorcycle gear.
No, but it ensures tested protection levels. Fit, material, and riding conditions also matter.
Full-grain leather offers the best abrasion resistance, followed by advanced textile blends.