A track day asks more of you than a ride to work. You lean further, brake harder and go faster. Good motorcycle track gear covers you from head to toe. Use this checklist the night before, so nothing stays at home. Then read each section to see what to look for in every item.
Track day gear checklist
Each track day organiser sets its own gear rules. Read them before you pack. If a rule and this list differ, follow the rule.
A track day suit is a leather race suit with armor at the shoulders, elbows and knees. It has knee sliders on the outside. It should fit snug, so the armor stays in place when you lean or fall. Some organisers want a one-piece suit. Others also allow a two-piece suit that zips together all the way round.
Here is what to check on any motorcycle track suit:
MotoSpeeds makes four . Each has CE Type A knee sliders that you can change. Each has inner protectors CE certified to EN 1621.1 and a CE-Level 2 back and thigh protector. The main seams are double and triple safety stitched with bonded nylon thread. All four have an aerodynamic race hump.
| Suit | Outer armor | Also has |
|---|---|---|
| Metal armor at shoulder, elbow and knee | Top-grain cowhide, detachable mesh lining | |
| TPU-reinforced armor at shoulder, elbow and knee | Detachable mesh lining with stretch panels | |
| TPU-reinforced titanium armor at shoulder, elbow and knee | Monaco-treated kangaroo leather, Schoeller Keprotec stretch inserts | |
| TPU-reinforced titanium armor at shoulder and knee | Detachable breathable liner |
Looking for a women's motorcycle track suit? All four suits come in women's sizes EU 38 to 50. Men's sizes run from EU 42 to 60. Each suit also has a Custom Size option. With it, the suit is made to your measurements. See how to measure first.
Want your own colors and design? are made in cowhide for men and women. They have removable CE Level 2 armor (EN 1621-1:2012) at the shoulders, elbows, knees and hips. They also have TPU elbow sliders and knee sliders you can replace.
Both can work on a track day. A one-piece suit has no join at the waist, so there is no zip there to come apart. A two-piece suit is easier to put on and take off. For the track, its jacket and pants must zip together all the way round. Read your organiser's rules first, as some only allow one-piece suits.
Each of the four MotoSpeeds RACE suits comes as a 1-piece or a 2-piece suit. So you can pick the style first and the model second. If you plan to ride on the street too, a two-piece suit may suit you better. For a full side-by-side look at comfort and cover, read one-piece vs two-piece suits.
A back protector is a firm pad that sits along your spine. It spreads the force of a hit over a wider area. The European standard for back protectors is EN 1621-2. As with arm and leg armor, a Level 2 back protector lets less force pass through than a Level 1 one.
Some suits have a back protector built in. Others have a pocket for one, and some have neither. Check your suit before the day. If it has no back protector, wear a strap-on one under the suit.
Try the suit on with the protector in place. You should be able to tuck in on the bike without the pad pushing into your neck or hips.
Track gloves should cover your whole hand and wrist. Look for hard knuckle protection, sliders on the fingers and a strong lining in the palm. The cuff should close tight so the glove cannot slip off. Short summer gloves leave your wrist bare, so keep them for the street.
MotoSpeeds has two in the RACE range.
Wear your gloves with your suit on at home. Check that you can work the brake and clutch levers with ease.
Track boots need hard shin, ankle and toe protection. They also need a toe slider. Your toe can touch the track when you lean, and the slider takes that wear. The boot should be tall enough to meet your suit leg with no gap. Street boots and sneakers leave your ankle open.
There are two ways a boot can meet your suit:
MotoSpeeds makes both styles: the and the . They share the same parts:
See both styles in .
Your helmet is the one item you cannot ride without. Bring a full-face helmet that fits well and a spare visor for when the light changes. Then pack a base layer, earplugs, water, a tire gauge, basic tools and your driver's license. Check your organiser's helmet rules before the day.
A base layer is a thin top and pants, or a one-piece, worn under your leathers. It helps the suit slide on. It also soaks up sweat, so the lining stays drier.
Weather changes what you wear under the suit. For cold days, see our winter track day gear setup. For hot days, read about summer race suit ventilation.
Do a last gear check in the pit before the first session. Close every zip and fasten the collar. Make sure the armor sits on your shoulders, elbows and knees. Check that both knee sliders are on tight. Then make sure your gloves sit cleanly over or under your cuffs, with no gap at the wrist.
If any part of your suit feels wrong, fix it before the day, not on the grid. To start from the right suit, read how to choose a motorcycle race suit.
You need five core items: a helmet, a leather race suit, a back protector, track gloves and track boots. The suit should be one-piece or a two-piece that zips together. Add a base layer, a spare visor, water and your license. Always check your organiser's gear rules first.
A motorcycle track suit is a leather race suit made for riding on a track. It has armor at the shoulders, elbows and knees, plus knee sliders on the outside. It comes as one piece or as a jacket and pants that zip together. See our .
Yes. The four MotoSpeeds RACE suits come in women's sizes EU 38 to 50. Custom Race Suits are also made for women, with your own design. Each RACE suit has a Custom Size option too, so it can be made to your measurements.
Yes. Custom Race Suits let you choose your own design in cowhide. They have removable CE Level 2 armor at the shoulders, elbows, knees and hips. They also have TPU elbow sliders, knee sliders you can replace, and a removable spine protector that is EN 1621-2 compatible.
A one-piece suit has no waist join, so it is the usual pick for the track. A two-piece suit is easier to wear off the bike, but it must zip together all the way round. Some organisers only allow one-piece suits. For more on protection and comfort, read one-piece vs two-piece suits.
Ready to fill the gaps in your list? See all MotoSpeeds in one place.