⨯
Blog's Menu

Nomex Racing Suits Explained: Layers, SFI and FIA Ratings

March 7, 2026

A Nomex racing suit is a driving suit made from a fiber that resists flame. It does not make you safe from fire. It buys you time. The layers slow the heat, and the label tells you how much time the fabric gave in a lab test. Read on to learn how the layers work and what SFI and FIA labels mean.

You will also find tips on what to wear under the suit, how to fit it, how to clean it and when to replace it. For the full range of driving suits, see our auto racing suits .

What is a Nomex racing suit?

A Nomex racing suit is a driving suit made with Nomex, a type of aramid fiber. Aramid is a strong man-made fiber. In Nomex, the flame resistance is part of the fiber itself. It is not a coating added later.

When Nomex gets very hot, it does not melt and drip like many street fabrics. Instead, the fiber chars and gets thicker. That thick, charred layer slows the heat on its way to your skin. This is why the word to use is "fire-resistant". No wearable fabric can stand up to flame forever.

You may also see suits made from Proban. Proban is cotton that has been given a flame-resistant treatment. The cotton itself is not fire-resistant. We compare the two in detail in our guide to Nomex vs Proban.

How do the layers of a fire suit work?

A fire suit works by stacking layers of fire-resistant fabric with thin pockets of air between them. Air does not pass heat well. Each layer and each air gap slows the heat a little more. The outer shell takes the flame first, the middle layer adds insulation, and the inner lining sits next to your skin.

Outer shell

The outer shell is the part you see. It faces the flame and the heat first. It also takes rubbing from the seat, belts and car. On a Nomex racing suit, the shell is made of Nomex or a similar aramid fabric.

Middle layer

Many suits add one or more middle layers. Their main job is to hold still air. Quilted stitching keeps the layers in place, so the air gaps stay even across the body.

Inner lining

The inner lining touches your underwear layer. It should be soft and move sweat away from your skin. A hot, wet lining feels bad and can make you tired on a long run.

Layers are not the rating

More layers often mean more heat protection. But the layer count is not the rating. Two suits with the same number of layers can test very differently. The fabric weight, the weave and the air gaps all change the result. Always read the rating on the label, not the number of layers. Learn more in our look at single-layer vs multi-layer suits.

What does TPP mean?

TPP stands for Thermal Protective Performance. It is a lab score for how well a fabric stack holds back heat. The test shines heat and flame at the fabric and times how long it takes before a second-degree burn would start on skin. A higher TPP number means more time.

A simple rule helps you read it. Divide the TPP number by two. The answer is close to the number of seconds before a second-degree burn would start in the test. So a TPP of 19 means about 10 seconds, not 19 seconds. Some sellers get this wrong.

Keep in mind that TPP comes from a lab test on fabric. A real fire is not the same as a lab. Fit, sweat, damage and what you wear under the suit all change what happens on the track. The score helps you compare suits. It is not a promise.

SFI 3.2A ratings: /1 to /20

SFI 3.2A is the SFI Foundation spec for driver suits. The number after the slash is the rating level. It runs from /1 up to /20. Each level needs a higher TPP score. A higher number means the fabric gave more time in the test before a second-degree burn would start.

RatingTPP valueSeconds to a second-degree burn
3.2A/163
3.2A/3147
3.2A/51910
3.2A/103819
3.2A/156030
3.2A/208040

Different events and classes ask for different levels. Your event rule book sets the level you need, so check it before you choose a suit.

How to read the label

A suit made to an SFI spec carries a small patch, often on the collar or sleeve. It shows the spec and the rating, such as "3.2A/5". Some events also check the date on the patch. Keep the patch clean and easy to read. An official may ask to see it.

Gloves, shoes and underwear use SFI 3.3

SFI 3.2A covers suits only. Gloves, shoes, boots, underwear, socks and head socks fall under a different spec, SFI 3.3. So a glove label should show 3.3, not 3.2A. For more on choosing a suit by rating, read our guide to SFI and FIA approved car racing suits.

What is FIA 8856-2018?

FIA 8856-2018 is the FIA standard for protective clothing for car drivers. The FIA runs many international racing series. The standard covers suits, underwear, socks, shoes, balaclavas and gloves. A garment that passes is homologated, which means approved, and gets a label with a homologation number.

Approved items appear on the FIA Technical List n°74. You or an official can check the number on your label against that list. FIA 8856-2018 replaced the older 8856-2000 standard. Your rule book says which labels it accepts.

FIA and SFI test in different ways, so you cannot swap one number for the other. A /5 SFI label is not the same thing as an FIA label. See FIA 8856-2018 explained for the full details, and our post on the difference between SFI and FIA suits if you race under both.

What to wear under your fire suit

Under a fire suit, wear fire-resistant underwear that covers you from neck to ankles. Add fire-resistant socks and a head sock or balaclava under your helmet. These pieces add one more layer of fabric and air. Many event rules ask for them, and they keep sweat off the suit lining.

Do not wear street clothes made from nylon, polyester or other plastic fibers under the suit. Many of these fabrics melt when they get hot, and melted fabric sticks to skin. Plain cotton is better than plastic fibers, but fire-resistant underwear is the safer choice.

Your gloves and shoes finish the outfit. Sleeves should overlap your gloves, and pant legs should cover the tops of your shoes. For a full gear list, see our guide to what safety equipment you need for car racing.

Fit, care and when to replace

A fire suit should fit well when you sit in the car, not just when you stand. It needs care that keeps the fabric clean and whole. And it needs a check before every event. A suit that is torn, oily or has a faded label may not pass inspection or protect you as it should.

Sizing

Measure and try the suit in your seated driving position. You should be able to reach the wheel and pedals with no pull at the shoulders, back or knees. Leave room for your underwear layer, since air gaps help slow heat. A suit that is too tight presses the layers flat. Our guide on how to measure yourself for a custom racing suit walks you through each step.

Cleaning

Always follow the care label first. As a general rule, use a mild soap, skip bleach and fabric softener, and let the suit air dry away from heat and strong sun. Oil and fuel left on the fabric can burn, so clean spills soon. Read how to clean Nomex gear for a step-by-step method.

Replacing

There is no fixed number of years for a suit. Before each event, look for holes, thin spots, broken seams and stuck zippers. Check for oil or fuel that will not wash out. Make sure the label is still there and easy to read. Also check whether your event limits how old a label may be. Replace the suit if it fails any of these checks, or after it has been in a fire. Our post on how often to replace a car race suit has more signs to look for.

Nomex suits at MotoSpeeds

MotoSpeeds offers four driving suits. Each comes in a one-piece or a two-piece fit. Each also has a Custom Size option, so you can have it made to your measurements. Use our How to Measure page to take them before you order. All four suits are rated SFI 3.2A/5.

  • The Custom Suit Pro adds extra layers of Nomex fabric at the shoulders, elbows and knees. It has a moisture-wicking inner lining.
  • The Custom Suit Enthusiast has extra layers of material at the shoulders, elbows and knees, plus a moisture-wicking inner lining.
  • The Custom Beginner Auto Racing Suit also has extra layers at the shoulders, elbows and knees, and a moisture-wicking inner lining.
  • The Team Suit is a driving suit with the same one-piece, two-piece and Custom Size choices.

Before you order any suit, check which label your event needs, and confirm the suit you choose carries it. You can compare all models in our auto racing suits range.

FAQ

How long can I safely use a racing fire suit before replacing it?

There is no set number of years. Inspect the suit before each event for holes, wear, broken seams, oil or fuel stains, and a missing or faded label. Some event rules limit how old a label can be. Replace the suit if it fails a check or has been in a fire. See how often to replace a car race suit.

How do I choose the right size racing fire suit for comfort and safety?

Fit the suit in your seated driving position, with your underwear layer on. You should reach the wheel and pedals with no pulling. Leave a little room so air can sit between the layers. Use our guide on how to measure yourself for a custom racing suit and our size chart.

How should I clean and care for my racing fire suit?

Follow the care label on your suit first. In general, use a mild soap, do not use bleach or fabric softener, and air dry the suit away from heat and sun. Clean oil and fuel off soon. Store it dry. For more detail, read how to clean Nomex gear.

What should I wear under my racing fire suit?

Wear fire-resistant underwear from neck to ankles, fire-resistant socks, and a head sock or balaclava. Avoid nylon, polyester and other plastic street fabrics, since many of them melt when hot. Check your rule book, as many events ask for these layers.

What is the difference between Proban and Nomex?

Nomex is a fiber that resists flame on its own. Proban is cotton that gets a flame-resistant treatment, so the protection comes from the finish, not the fiber. Both are used in driving suits. Read our full Nomex vs Proban comparison.

What do SFI fire suit ratings mean?

The number after "3.2A/" is the level, from /1 to /20. Each level needs a higher TPP score, which means more seconds before a second-degree burn would start in the lab test. A 3.2A/5 suit gives about 10 seconds. See the rating table above for every level.

Related Posts