Choose an FIA racing suit by checking event certification requirements, measuring fit in your cockpit, and comparing materials. Club racing suit buying guide.
Read More
Tired of gear that doesn't fit? Read how riders found safety and comfort with Motospeeds custom sizing. Design your perfect-fit motorbike race gear today.
Read More
An FIA race suit can last several years if you inspect it often, follow the care label and keep it clean and dry. Your event rules may still set an expiry date. Check the label, seams, cuffs and zips before each race. Replace the suit after damage or heavy wear. A good fit in the seat also helps it work as it should.
Read More
Your type of racing shapes the gear you need. Formula 1 drivers wear multi-layer suits with FIA labels. Track day and club drivers often pick SFI suits with one or two layers. Kart drivers want light suits that let them move. Check your event rules, measure while seated, and match gloves, shoes and balaclava as one set.
Read More
Your suit, gloves, shoes and balaclava must work with the harness and HANS device. The suit should lie flat across the shoulders and chest where the belts sit. Gloves should overlap the cuffs. Shoes should cover the ankles but still let you work the pedals. Check labels and wear before each event, and read your rulebook.
Read More
Nomex and Proban are the two most common fire-resistant suit fabrics. Nomex is a fiber that resists flame by itself, so it keeps that through many washes. Proban is a treatment on cotton, and it can fade with use. Proban often costs less. Nomex suits frequent racers and hot cockpits. Check your event rules first.
Read More
FIA 8856-2018 is a motorsport rule for fire resistant driver gear. It covers suits, gloves, shoes, balaclavas and underlayers. Gear that passes gets an FIA label sewn in. A label does not stop all injuries, so fit, layers and gear condition still matter. Always check what your event rulebook asks for.
Read More
Start with your event rules, since many ask for an SFI or FIA label. Measure yourself while seated, not standing. The suit should cover your wrists, ankles and neck with no gaps. It should feel snug but let you breathe and move your arms. Pick the weight that suits your type of racing and the heat in your car.
Read More
CE, SFI, FIA and Class AA are not the same test. CE is the European system, with Level 1 and Level 2 for armour and ratings for how well gear resists sliding. SFI is used mostly in North American racing. FIA covers world car racing. Class AA is a rating for touring gear used over long rides.
Read More
A single layer racing suit is light and breathes well, so it fits karting and low risk track days. A multi layer suit uses two or three fire resistant layers. Air trapped between them slows heat, which gives a driver more time to get out. Always check the SFI or FIA rating your event asks for.
Read More
A standard racing suit meets basic safety rules at a lower cost. It suits beginners and drivers who race now and then. A custom suit is cut to your own body sizes, often with more layers of Nomex-based fabric, more airflow and more room to move. Drivers who race often may find the custom fit worth it.
Read More
A custom racing suit only fits well if your numbers are right. Use a soft tape, wear light clothes and ask a helper. Measure your chest, waist, hips and thigh with the tape level. Then take your inner leg, outer arm and height. Do not pull the tape too tight or measure over thick clothes.
Read More
SFI and FIA are the two main racing suit standards. SFI 3.2A uses levels like /1, /5 and /15. Higher numbers mean more heat protection, measured as TPP. FIA 8856-2018 also covers abrasion, tear strength and heat transfer. SFI is common in North America and drag racing. FIA is used in international racing. Your series rules decide which you need.
Read More
A Nomex racing suit slows heat with fire-resistant fiber and layers of trapped air. Learn what the outer shell, middle layer and lining do, how to read SFI 3.2A ratings and TPP numbers, how FIA 8856-2018 differs, and what to wear under your suit, plus fit, cleaning and replacement checks.
Read More
SFI is a U.S. group that sets safety specs for racing in North America. Its suit spec is 3.2A, and a higher number such as /5 or /10 means more time before a burn. The FIA runs world motorsport. Its current suit standard is FIA 8856-2018, and each suit has a label with a homologation number and an expiry year.
Read More